How to Mount UHMWPE Bollard Pads with T-Bolt Capture

Overview

This guide covers the practical steps to mount uhmwpe bollard pads with t-bolt capture. JSLT Marine produces engineering plastic components in UHMWPE, HDPE, PA, POM and PTFE — full-process fabrication from raw sheet to CNC-machined parts.

Step-by-step procedure

1. Machine T-slot in pad. CNC mill T-slot to match T-bolt head — no through-holes on face.
2. Install T-bolts in bollard. Tap bollard or use stainless inserts; thread up to face.
3. Slide pad over bolts. Pad slides on; bolts capture in T-slots.
4. Add end retainers. Bolted end caps prevent pad sliding off.
5. Torque pattern. Tighten in sequence; T-bolt capture allows thermal movement.

Need help?

Our engineering team reviews drawings within 24 hours. We have shipped to 80+ countries across 4 continents and hold ISO 9001 certification.