Our core marine product. UHMWPE (PE1000) face pads in 30/50/80/100mm thicknesses, pre-drilled to your drawing. Black UV-stabilized formulation resists harbor sun and salt spray for 15+ years. Shore D ≥62 hardness; abrasion 5× better than HDPE; coefficient of friction <0.15 against ship hull steel.
All SKUs are made-to-order from our own UHMWPE / HDPE / nylon production line. Send your DWG / DXF / PDF / STEP — we quote within 24 hours, MOQ from 1 piece.
| Product | MOQ | Material | Image |
|---|---|---|---|
| UHMWPE Marine Fender Pad — Dock Bumper Face 30mm | 10 pieces | UHMWPE (PE1000) | |
| Marine Quay Wall Fender Pad UHMWPE 50mm | 5 pieces | UHMWPE | |
| Heavy Duty UHMWPE Dock Fender Face 80mm | 5 pieces | UHMWPE PE1000 | |
| Cone Fender Frontal UHMWPE Wear Pad 100mm | 2 pieces | UHMWPE |  |
| Tug Boat Side Fender UHMWPE Sliding Plate | 10 pieces | UHMWPE | |
| Material | UHMWPE (PE1000), molecular weight 5-9 million |
|---|---|
| Density | 0.93 – 0.96 g/cm³ |
| Hardness | Shore D 62 – 67 |
| Tensile Strength | ≥ 22 MPa |
| Coefficient of Friction (vs steel) | 0.10 – 0.15 |
| UV Stabilization | Carbon black 2.5%, 15+ years outdoor life |
| Working Temp | -100 °C to +80 °C |
| Standard Sheet | 1000×1000 / 1500×1000 / 1500×1500 mm |
| Thickness Range | 30 – 100 mm (custom up to 200 mm) |
| Mounting | Pre-drilled holes per drawing, countersunk M16/M20 standard |
| Lead Time | 15 – 25 days FOB Qingdao for 1×20FCL |
How a container terminal in Southeast Asia replaced 24 cone fender frontal pads in a single 20 FCL shipment.
Read case →A harbor tug operator standardized on safety yellow 40mm UHMWPE sliding plates after 3-year wear study.
Read case →A fishing port in Eastern Europe replaced timber fender boards with 50mm UHMWPE quay wall pads.
Read case →For most container terminals handling vessels up to 18,000 TEU, the standard frontal pad on a cone fender is 80 mm — 100 mm. Smaller feeder ports often use 50 – 60 mm. If you send us your fender drawing or vessel class, we'll recommend a thickness.
Yes. Send us a PDF or DXF drawing — we drill and countersink to your spec at no extra cost. M16 and M20 countersunk patterns are standard; we can also chamfer edges.
Real. We use 2.5 % carbon black master batch compounded into the UHMWPE base resin during sintering. This delivers 15+ year outdoor life — verified by our oldest installation in Tianjin port (2009) which is still in service.
5 pieces for thicker pads (≥80 mm) and 10 pieces for thinner pads. Container-load orders (~5 tons / 20 FCL) get our best wholesale terms.
Yes — Qingdao is our default port. We can also ship FOB Shanghai or Tianjin on request. Lead time from PO confirmation: 15 – 25 days for one 20 FCL.
Tell us about your marine fendering project. Our engineering team responds within 12 hours with technical specs, lead time and a tailored quotation.